Routine inspection before packing operation

- May 18, 2018-

The use of packing line production line has brought a lot of help to people, but some packing line production line manufacturers and friends are not able to carry out routine inspections before the operation of the packing line production line in order to be able to quickly operate the packing line production line. The production, then how do we operate the packing line?

IMG_4115.JPG

The premise for operating the strapping line is that the first thing to notice is the preparation work. Before using it, you should carefully check what the device is like and see if there is any damage to the power supply and then you need to prepare it. Good outer packaging paper, these are all problems that we need to pay attention to. Secondly, we should use it standardly. When we use it, we should know its working principle, operating procedures, etc. In the process of use, we should first The power supply is turned on and the production line is warmed up for a few minutes. In this case, the length of the strap can be properly adjusted. After the use is completed, the power supply should be cut off to prevent it from leaking.


Prerequisites for operating the strapping line


1. Preparation

First, we must check whether the equipment and packaging tape are inserted correctly, and then check whether the power cord is damaged. Then check whether the moving parts are lubricated. We must also look at whether the packing tape production line is fixed and does not move. Finally we must prepare the outer packaging paper.


2. Precautions

Another special reminder is that it is forbidden to put the hand into the packing tape, and it is forbidden to carry out dangerous operations such as disassembling the equipment when transporting it.


End of operation


After the operation of the packed production line, remember to cut off the power supply and close the switch to prevent leakage and cause electric shock.


4 operating specifications

The operator should have a basic understanding of the equipment structure, working principle, operating procedures, and adjustment methods. Before the operation, the power supply must be turned on. The packing belt production line should be warmed up for a few minutes. At the same time, the length of the packing belt must be adjusted. Of course, we must also listen to the inside of the machine. No noise, no smoke and other abnormal phenomena, According to the color box, manual thickness or customer requirements for each number of packaging, point to clearly the number of packaging, wrapped with wrapping paper, and then packaged with a strapping production line .


We all understand the principle that "no rules are not achievable". It also tells us to do anything according to a certain standard, and the operation of packing a production line is no exception. I have also often heard a series of problems arising from the failure to operate the strapping line as required to cause loose, leaky electricity, and even damage to the strapping line.

The advantages of automatic packing belt production line are many, such as saving labor costs, saving late energy consumption, improving production efficiency, and the quality of packing tape produced is also better, and the size is precise. I hope that some of the above content can be helpful to everyone. The manufacturer looks forward to your consultation and cooperation. If you don't understand it, you can contact us. We will ask you to give detailed answers.